Max_Hervo
(Max Hervo)
February 28, 2023, 6:30pm
1
Hello,
We would like to record all data on the SD card (not only the two minutes average)
Is there a way to record the serial output (like with the purple air utility) on the SD card?
Do you know what the config.txt file in the SD cards corresponds to?
Thanks,
Maxime
Hello Maxime,
Here is a post about how to change the data logging rate.
It is possible to have a higher logging rate on the SD card. This involves disassembling the sensor, cutting a wire, and changing a file on the SD card. Note that following these steps will void your warranty.
Step 1: Cut the wire
You would need to remove the screw on the bracket holding the sensor to the housing. Locate the SD logger holding the SD card. Cut the black wire. Your sensor will begin logging a very large amount of information to the SD card, much of it junk data. This will cause …
Hope this helps!
todd_m
(Todd)
March 2, 2023, 12:20am
3
Hello!
I made this change and I am not seeing the 1 second updates. Any other recommendations?
-Todd
Amanda_Hawkins:
baud,escape,esc#,mode,verb,echo,ignoreRX
Hello Todd, You will also need to cut the black wire. I have posted about it here and will update this post as well. Higher Logging Rate on the SD Card