Display Multiple Sensors on Embedded Map

General
1

I have 20 PurpleAir Flexes and I would like to embed the PurpleAir Map on my website and only display my 20 sensors. Is this possible? I see the code to embed the PA map with a specific sensor, but I don’t want 20 individual maps. My sensors are public.

Thanks!

2

Yes it is. The example URL below will only display three sensors on the map, and hide all other sensors.
https://map.purpleair.com/1/l/m/i/mAQI/a10/p2592000/cC0?show=5572|171249|39993#13.34/40.52987/-111.91239

3

Thanks so much James! I tested it out with four of my sensors and it worked.

Do you know what the ‘p2592000’ parameter is? I can figure out most through the map widget on the PA map, but this one still has me stumped.

4

HI @ryanporter

That reflects the chosen “reporting or modified within setting.” Which, for your use case, I don’t think is important.

(EDIT: On second thought, it might be useful if you want to know if a sensor has gone offline. You could set that to “all-time” so you’ll always see your offline sensors.)