# PA-II-Flex 7.04 Temp Press and Humidity Sensor not reporting

**URL:** <https://community.purpleair.com/t/pa-ii-flex-7-04-temp-press-and-humidity-sensor-not-reporting/22852>\
**Category:** Uncategorized\
**Created:** [July 30, 2026, 5:17pm UTC](https://community.purpleair.com/t/pa-ii-flex-7-04-temp-press-and-humidity-sensor-not-reporting/22852 "2026-07-30T17:17:54Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![RosieCreek](https://avatars.discourse-cdn.com/v4/letter/r/bbe5ce/32.png) [@RosieCreek](https://community.purpleair.com/u/RosieCreek)\
**Post date:** [July 30, 2026, 5:17pm UTC](https://community.purpleair.com/t/pa-ii-flex-7-04-temp-press-and-humidity-sensor-not-reporting/22852/1 "2026-07-30T17:17:54Z")

</div>

My BME Sensor which is not reporting any data. I have a second PA-II which is reporting properly and I have interchanged the Sensors between the two. The BME Sensor from the PA-II-Flex works in the second PA-II so the problem is not with the BME module. Is there a way to check the board the BME module plugs into. My sensor ID xx:xx:xx:xx:xx:xx.

---

<div class="post-metadata">

**Author:** ![ShawnBoyle](https://sea2.discourse-cdn.com/flex020/user_avatar/community.purpleair.com/shawnboyle/32/6816_2.png) [@ShawnBoyle](https://community.purpleair.com/u/ShawnBoyle)\
**Post date:** [August 3, 2026, 10:26pm UTC](https://community.purpleair.com/t/pa-ii-flex-7-04-temp-press-and-humidity-sensor-not-reporting/22852/3 "2026-08-03T22:26:56Z")

</div>

Hi Rosie,

Thanks for letting us know. We can certainly take a look at the sensor board to see if we can identify why this might be occurring. Could you send some close-up photos of the board connection where the BME unit is?

Feel free to send an email in to [contact@purpleair.com](mailto:contact@purpleair.com) as well, referencing this post, as we can discuss potential options for part replacement and repair. Thank you!

---

<div class="post-metadata">

**Author:** ![RosieCreek](https://avatars.discourse-cdn.com/v4/letter/r/bbe5ce/32.png) [@RosieCreek](https://community.purpleair.com/u/RosieCreek)\
**Post date:** [August 4, 2026, 1:24am UTC](https://community.purpleair.com/t/pa-ii-flex-7-04-temp-press-and-humidity-sensor-not-reporting/22852/4 "2026-08-04T01:24:31Z")

</div>

![](https://us1.discourse-cdn.com/flex020/uploads/purpleair/original/2X/b/b03a89ac052a9061ce67d3f48e3f05fc39ae5623.jpeg)

I hope the photo is good enough.

Tim