# Display Multiple Sensors on Embedded Map

**URL:** <https://community.purpleair.com/t/display-multiple-sensors-on-embedded-map/10115>\
**Category:** General\
**Created:** [August 29, 2024, 4:31am UTC](https://community.purpleair.com/t/display-multiple-sensors-on-embedded-map/10115 "2024-08-29T04:31:36Z")\
**Posts on this page:** 5\
**Page:** 1

<div class="post-metadata">

**Author:** ![ryanporter](https://sea2.discourse-cdn.com/flex020/user_avatar/community.purpleair.com/ryanporter/32/4501_2.png) [@ryanporter](https://community.purpleair.com/u/ryanporter)\
**Post date:** [August 29, 2024, 4:31am UTC](https://community.purpleair.com/t/display-multiple-sensors-on-embedded-map/10115/1 "2024-08-29T04:31:36Z")

</div>

I have 20 PurpleAir Flexes and I would like to embed the PurpleAir Map on my website and only display my 20 sensors. Is this possible? I see the code to embed the PA map with a specific sensor, but I don’t want 20 individual maps. My sensors are public.

Thanks!

---

<div class="post-metadata">

**Author:** ![wawzat](https://sea2.discourse-cdn.com/flex020/user_avatar/community.purpleair.com/wawzat/32/219_2.png) [@wawzat](https://community.purpleair.com/u/wawzat)\
**Post date:** [September 3, 2024, 2:06pm UTC](https://community.purpleair.com/t/display-multiple-sensors-on-embedded-map/10115/2 "2024-09-03T14:06:04Z")

</div>

Yes it is. The example URL below will only display three sensors on the map, and hide all other sensors.  
[https://map.purpleair.com/1/l/m/i/mAQI/a10/p2592000/cC0?show=5572|171249|39993#13.34/40.52987/-111.91239](https://map.purpleair.com/1/l/m/i/mAQI/a10/p2592000/cC0?show=5572%7C171249%7C39993#13.34/40.52987/-111.91239)

---

<div class="post-metadata">

**Author:** ![ryanporter](https://sea2.discourse-cdn.com/flex020/user_avatar/community.purpleair.com/ryanporter/32/4501_2.png) [@ryanporter](https://community.purpleair.com/u/ryanporter)\
**Post date:** [September 3, 2024, 4:51pm UTC](https://community.purpleair.com/t/display-multiple-sensors-on-embedded-map/10115/3 "2024-09-03T16:51:48Z")

</div>

Thanks so much James! I tested it out with four of my sensors and it worked.

Do you know what the ‘p2592000’ parameter is? I can figure out most through the map widget on the PA map, but this one still has me stumped.

---

<div class="post-metadata">

**Author:** ![Kieran](https://sea2.discourse-cdn.com/flex020/user_avatar/community.purpleair.com/kieran/32/6220_2.png) [@Kieran](https://community.purpleair.com/u/Kieran)\
**Post date:** [September 5, 2024, 7:14pm UTC](https://community.purpleair.com/t/display-multiple-sensors-on-embedded-map/10115/4 "2024-09-05T19:14:59Z")

</div>

HI @ryanporter

That reflects the chosen “reporting or modified within setting.” Which, for your use case, I don’t think is important.

(EDIT: On second thought, it might be useful if you want to know if a sensor has gone offline. You could set that to “all-time” so you’ll always see your offline sensors.)

---

<div class="post-metadata">

**Author:** ![ryanporter](https://sea2.discourse-cdn.com/flex020/user_avatar/community.purpleair.com/ryanporter/32/4501_2.png) [@ryanporter](https://community.purpleair.com/u/ryanporter)\
**Post date:** [September 10, 2024, 4:13am UTC](https://community.purpleair.com/t/display-multiple-sensors-on-embedded-map/10115/5 "2024-09-10T04:13:46Z")

</div>

Thanks Kieran! I guess I skipped over that field when testing…lol.