# Can I calibrate my PurpleAir sensor?

**URL:** <https://community.purpleair.com/t/can-i-calibrate-my-purpleair-sensor/844>\
**Category:** Sensors\
**Created:** [June 4, 2022, 6:43pm UTC](https://community.purpleair.com/t/can-i-calibrate-my-purpleair-sensor/844 "2022-06-04T18:43:15Z")\
**Posts on this page:** 1\
**Page:** 1

<div class="post-metadata">

**Author:** ![PurpleAir](https://sea2.discourse-cdn.com/flex020/user_avatar/community.purpleair.com/purpleair/32/176_2.png) [@PurpleAir](https://community.purpleair.com/u/PurpleAir)\
**Post date:** [June 4, 2022, 6:43pm UTC](https://community.purpleair.com/t/can-i-calibrate-my-purpleair-sensor/844/1 "2022-06-04T18:43:15Z")

</div>

**Factory Calibration & Lifetime Limitations**

PurpleAir sensors use Plantower laser counters that are factory-calibrated before shipping. There is no method for post-production calibration of the laser counters—you can’t adjust or calibrate the sensor yourself.

**What You _Can_ Do to Maintain Accuracy**

Although calibration isn’t possible, you can help ensure accurate readings through proper maintenance:

1. [**Clean the laser counters**](https://community.purpleair.com/t/sensor-maintenance/1531#p-2588-cleaning-the-laser-counters-1)

- If one channel is stuck at zero, spikes, or shows errors, it may be clogged with dust, debris, or even insects.
- Safely clean the intake holes with compressed air or a shop vacuum, following the [Sensor Maintenance Guide](https://community.purpleair.com/t/sensor-maintenance/1531) and video tutorials. Be sure to power off the sensor before cleaning and avoid spraying air directly into the fan

1. [**Replace worn laser counters**](https://community.purpleair.com/t/sensor-laser-counter-replacement/7791)

- Laser counters typically last about 2 years, although environmental factors (humidity, dust, heat) can shorten that lifespan
- If cleaning doesn’t resolve performance issues, replacement is the recommended solution.

**Managing Temperature & Humidity Sensors**

- The temperature and humidity sensors in your device are also factory-calibrated and cannot be recalibrated post-production
- Look for mapped corrections in the PurpleAir interface (e.g., “Temperature °C” layer), or note firmware-affected readings—firmware like v7.04 may skew temperature slightly

[Calibrating Temperature sensors](https://community.purpleair.com/t/q-can-i-calibrate-the-temperature-sensor/21762)

**External Calibration & Alternative Algorithms**

While you can’t calibrate the sensor hardware itself, you can apply external correction algorithms to data:

- PurpleAir offers alternative conversion methods for PM2.5 readings, such as ALT-CF3.4, which have been validated against reference monitors and offer improved precision and lower detection limits compared to the default CF=1 method [**Calibration of PurpleAir monitors**](https://community.purpleair.com/t/calibration-of-purpleair-monitors/482)
- Users can select these conversions in the PurpleAir map or API, allowing for better comparability with regulatory-grade data.

**Performance Over Time**

Long-term studies show that sensors degrade gradually:

- After 4 years, the average disagreement between a sensor’s two channels increases by ~4%, and approximately 2% of sensors experience permanent degradation [**Sensor Owner’s Guide**](https://community.purpleair.com/t/sensor-owners-guide/8170)
- Sensors in hot/humid climates may degrade faster—regular monitoring and maintenance are key.

**Troubleshooting & Support**

- For detailed cleaning procedures and step-by-step video guides, check the [**Sensor Maintenance Guide**](https://community.purpleair.com/t/sensor-maintenance/1531)
- For help choosing the right data conversion method, see the [**PurpleAir map help**](https://community.purpleair.com/t/air-quality-index-layers/153) or [**API documentation**](https://api.purpleair.com/).
- If issues persist after cleaning or replacing parts, feel free to reach out to us for support.

## Learn More

Learn more about [sensor maintenance](https://community.purpleair.com/t/after-installation/151#sensor-maintenance-1).  
Learn more about [how the sensors function](https://community.purpleair.com/t/purpleair-sensors-functional-overview/150).  
Learn more about [how we measure air quality](https://community.purpleair.com/t/purpleair-sensors-functional-overview/150#how-we-measure-air-quality-7).
