# Air-Gapped Networks

**URL:** <https://community.purpleair.com/t/air-gapped-networks/22934>\
**Category:** General\
**Created:** [October 2, 2026, 12:57am UTC](https://community.purpleair.com/t/air-gapped-networks/22934 "2026-10-02T00:57:33Z")\
**Posts on this page:** 4\
**Page:** 1

<div class="post-metadata">

**Author:** ![dbgessleman](https://avatars.discourse-cdn.com/v4/letter/d/d9b06d/32.png) [@dbgessleman](https://community.purpleair.com/u/dbgessleman)\
**Post date:** [October 2, 2026, 12:57am UTC](https://community.purpleair.com/t/air-gapped-networks/22934/1 "2026-10-02T00:57:33Z")

</div>

Is there a way to static ip a zen sensor for deployment on an air gapped network? That way I can manually record sensor readings via the sensors address if that is even possible.

---

<div class="post-metadata">

**Author:** ![Andrew\_Mason](https://sea2.discourse-cdn.com/flex020/user_avatar/community.purpleair.com/andrew_mason/32/5077_2.png) [@Andrew\_Mason](https://community.purpleair.com/u/Andrew_Mason)\
**Post date:** [October 6, 2026, 1:02am UTC](https://community.purpleair.com/t/air-gapped-networks/22934/2 "2026-10-06T01:02:22Z")

</div>

The setting to assign a static IP address usually done in the router, not the device. Do you have admin control of your router?

---

<div class="post-metadata">

**Author:** ![dbgessleman](https://avatars.discourse-cdn.com/v4/letter/d/d9b06d/32.png) [@dbgessleman](https://community.purpleair.com/u/dbgessleman)\
**Post date:** [October 6, 2026, 7:51am UTC](https://community.purpleair.com/t/air-gapped-networks/22934/3 "2026-10-06T07:51:29Z")

</div>

No but I know the admin.

Are sensor readings simply listening to a port on the ip address?

---

<div class="post-metadata">

**Author:** ![Andrew\_Mason](https://sea2.discourse-cdn.com/flex020/user_avatar/community.purpleair.com/andrew_mason/32/5077_2.png) [@Andrew\_Mason](https://community.purpleair.com/u/Andrew_Mason)\
**Post date:** [October 13, 2026, 12:23am UTC](https://community.purpleair.com/t/air-gapped-networks/22934/4 "2026-10-13T00:23:57Z")

</div>

I’m not knowledgeable about the ports.

But setting a static IP address is fairly straightforward. The exact steps to establish one vary depending on the manufacturer and the age. In general, it’s usually buried a few levels deep in a category like Advanced or DHCP. Best luck to you and your admin
